Why Do My Brakes Feel Spongy?

Why Do My Brakes Feel Spongy?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Your brakes are a complicated system on today’s cars and there are many reasons why they may not feel like they are performing like they should. In this short blog we want to tackle why your brake pedal may not feel like it should while braking.

First, let’s chat about how a common brake system works and what components are in the system. Most systems are hydraulic with some sort of air vacuum booster. For the simplest description on how they work, when you press on the brake pedal the booster helps the driver apply hundreds of pounds of pressure to the hydraulic components. The hydraulic system, (brake master cylinder) pushes fluid down towards the brake calipers and wheel cylinders via the brake lines. The pistons within these components are what apply the brake pads and or shoes to the rotating brake disc and brake drums. When you release your foot from the brake pedal, the booster relieves pressure to the master cylinder and fluid is allowed to return back to the brake fluid reservoir.

Why are brakes hydraulic and not air? Hydraulic systems are great for hundreds of pounds of pressure without compressing and losing the pressure. If air was used instead of hydraulic, the air would compress easily as it would if you pressing on a balloon. Hydraulics allow tremendous pressures to be applied without compressing.

A common symptom of a failed brake component is a spongy brake pedal. Most of the time this represents a hydraulic problem. There is a compromise in your brake hydraulic system causing it to leak brake fluid out and allows air to get into the system. This will cause a fading brake pedal and is often described to the auto repair shop as a spongy brake pedal.  While you push down on the brake pedal instead of all the pressure going to the brake pistons some will leak out and you will experience a pedal that goes to the floor. When releasing the brake pedal on a leaking system the returning motion will suck in air. Once air is introduced to the system the brake hydraulics are no longer able to create the needed pressure to apply your brakes!

Another cause of a spongy brake pedal are sticking brake slides, pins, and other moving parts. Your brakes are only millimeters away from the braking surface under normal operation when the brake is applied. This short travel allows for quick and smooth operation. If one of the pins in the brake caliper is stuck when you apply the brakes it will have longer to travel causing late braking and a spongy pedal. These moving parts should be inspected regularly and lubricated to help keep this from happening. Whenever a brake job is completed these parts should be either replaced if they are worn, or if they are still in good shape, they can be cleaned and lubricated and reused. Your automotive shop can help you decide the right action to take.

Most likely your car will be equipped with some sort of ABS (Anti-Lock Brake System.)  Most modern cars come equipped from the factory with this benefit. When your ABS system malfunctions is can also cause spongy brake pedal. Your ABS system is designed to allow the driver to maintain more control of the car in a high speed stop. By measuring the wheel speed of each wheel when you are in a panic stop situation the ABS computer controls the brakes to  keep the tires from locking up. Your ABS does this by releasing brake pressure  o that wheel.  This is important because a skidding wheel has less friction against the road surface and not only stops a car less quickly but  will not allow a driver to control the direction of the car.  When your ABS malfunctions it can cause the brake pressure in the system to be released, and as the driver you may feel very strange sensations with your brake pedal. Vibration, spongy pedal, pressure pushing back while you are applying the brakes, can all be described. If you are feeling one of these sensations, see your automotive shop as soon as possible.

Recently we had a vehicle at Casey’s Automotive that had a sinking spongy pedal. After checking over the brake system we found the brake booster had failed. Usually when a brake booster fails you will experience a very hard pedal because the booster is not able to give you the assist it is designed for.  This vehicle however was experiencing the opposite. When applying the brake pedal the brake pedal would sink and the vehicle was not easy to stop. The brake booster was full of fluid, destroying the inner diaphragm.

Bottom line cars a very complicated pieces of equipment. Your brakes are arguably one of the most important safety features and for best operation and safety you should have them checked at regular intervals and serviced when needed. It is our professional opinion at Casey’s Automotive brake problems should never be left unchecked. As soon as you feel a spongy brake pedal or any other braking abnormalities, take it in for service immediately.

Drive safe and happy motoring!

Leave a Reply

Your email address will not be published. Required fields are marked *